Newage NB3010 Hardness Tester

 

Availability: In stock

Newage NB3010 Hardness Tester


 

Please check the pictures for the exact product and accesories which you will get.

 

The Newage® NB-3010 Series is a benchtop, Brinell hardness tester ideal for occasional lab testing to high frequency testing on rough and large specimens such as castings, forgings, structural members and other components with substantial wall sections. The NB3010 is ideal for foundry environments, metallurgical plants, industrial laboratories, and virtually any application where the Brinell scale is utilized to determine hardness between 8-650 HBW. The NB3010 is an automatic hardness tester that uses pneumatically actuated deadweights to precisely apply loads at 62.5, 187.5, 250, 500, 750, 1000, 1500 or 3000 kgf. Dwell times can be selected from 12, 30, or 60-second rates with a pushbutton. The instrument has LEDsthat indicate Loading, Dwell Time and Unloading teststatus. The instrument issupplied with a precision 10mm tungsten carbide ball indenter with NIST Certificate. The resulting indentation can be measured optically with the optional HiLight® 20X Brinell scope or with our optional B.O.S.S. Brinell Optical Scanning System. Using our optional software, a personal computer is used to display and measure test impressions; to store test results; and to print test reports. Operator influences and bias is eliminated using the B.O.S.S. software.

 

The NB-3010 is supplied with the following standard accessories: 10mm tungsten carbide ball indenter, 3-inch Vee anvil, 3-inch flat anvil, 4.125-inch flat, vinyl cover, tools for setup, accessories case, spare fuse and conversion chart. Options include 2.5 mm and 5 mm tungsten carbide ball indenters, foot pedal controller, 20X Brinellscope, and our B.O.S.S. Brinell Optical Scanning System for automated measurement and data analysis. The NB-3010LB is supplied with the same standard accessories as the NB-3010 plus our B.O.S.S. Brinell Optical Scanning System

 

Features:

 

  •  Meets ASTM E-10 and ISO 6506
  • Deadweight Loading at better than 1% Accuracy
  • Pneumatic Actuation Ensures Constant Applied Loading and No Overload Conditions
  • Simple, Pushbutton Operation is Automatic
  • No Warm-Up Period Necessary for Optimum Productivity
  • Minimal Maintenance Requirements
  • Optimize Measurement with Optional B.O.S.S.® Brinell Optical Scanning System

 

Specification:

Vertical Capacity : 9-inches (229 mm)

Throat Depth : 4.5-inches (114 mm)

Load Range (kgf): 62.5, 187.5, 250, 500, 750, 1000, 1500, 3000

Dwell Times: 12, 30, 60 seconds

Air Requirements: 60 psi, 0.4 cfm

Power: 110Vac, 60Hz

Operating Temp: 50°F to 120°F 10°C to 49°C



30 DAYS RETURN POLICY


Customer satisfaction is our primary goal at Gizmo Machine Tools Inc. and we do our best to describe each item accurately. However, sometimes it might happen that the item does not fulfill your expectation and is found to be broken or non-working. For any such incident we offer a 30 day return policy from the date of invoice on all the items UNLESS any other condition is specifically stated within the listing. The buyer is responsible for the payment of return shipping. Please note that units being sold in as-is condition carry no warranty or guarantee. Please contact us directly to let us know you will be returning the defective unit. Once we receive the unit and have verified it is in the same condition as when we shipped it, we will either send you a replacement unit if we have one in stock or we will issue a refund for the unit price. All refunds will be for the price of the defective unit ONLY and do not include shipping charges.


Alterations or removal of any components off an item voids the 30-day return policy.



All specifications are subject to verification by purchasing entity.
CA$7,530.00
SiteLock