2005 Nakamura WT-250MM Turning Center
Sold
2005 Nakamura WT-250MM Turning Center
Available quantity:1
Description
*WITH BAR FEEDER AND BAR RECEIVER* EQUIPPED WITH Abnormal load detection air bag function Misc Tool Holders as shown in the pictures Chip conveyor high volume coolant and high pressure systems LNS quickload servo s3 short magazine bar feed LNS blaze air right bar receiver Bar feed interface manual guide eye conversational programming N-T nurse tool monitoring function Microcentric CB65mm front and sub Spindles N-T torque navigator for part and datum point recognition Transformer All specifications are subject to verification by purchasing entity.
Specifications
| Manufacturer | Nakamura Tome |
| Model | WT-250MM |
| Year | 2005 |
| Condition | Used |
| Serial Number | M240403 |
| Stock Number | LTH-NAK-657 |
| Swing | 16 IN |
| Turning diameter | 15.34 IN |
| Machining length | 17.12 IN |
| Bar capacity(l) | 2.56 IN |
| Bar capacity(r) | 2.54 IN |
| X axis travel | 7.67 IN |
| Z axis travel | 18.9 IN |
| X1 travels | 7.67 IN |
| Z1 travels | 18.9 IN |
| Rapid traverse (x/z) | 472/945 IPM |
| Spindle speed (rpm) | 3600 RPM |
| Tool stations (turning / driven) | 24 |
| Approx weight | 19,600 Lbs |
| Controller | Fanuc 18i-TB |