CNC Turning Centers

  1. Doosan PUMA GT 2600 Turning Center
     

    Doosan PUMA GT 2600 Turning Center

    Rigid 30 degree one piece cast iron slant bed
    Wide box way construction with Turcite-B anti-friction way surfaces
    High precision, pre-tensioned X & Z axes double nut ball screws with electric torque
    limiter protection
    12 station heavy duty servo controlled turret (.15 second turret swivel)
    25 hp high speed - high torque digital AC spindle motor
    Large 18.1" maximum turning diameter
    Large 3.19" bar capacity
    25.9" maximum turning length
    Fast 1,181 ipm Z axis rapid traverse
    Full sliding cover protection for tailstock guide ways
    Bolt up chip conveyor design for easy access and removal of coolant tank
    FANUC Oi-T control with swiveling operator's panel
    Doosan EZ Guide i Conversational Programming
    Doosan Tool Load Monitoring System

      

  2. Eurotech E-42 Turning Center
     

    Eurotech E-42 Turning Center

    Chip Conveyor
    Coolant tank

      

  3. Racer RMC L25-B Turning Center
     

      

    Video
  4. Hwacheon 2SP-2 Turning Center (2 Similar Machines Available)
     

    Hwacheon 2SP-2 Turning Center (2 Similar Machines Available)

    Chip Conveyor
    Special Chucks and Tooling System
    Auto- Loading and Unloading System

      

  5. Daewoo PUMA-250B Turning Center Machine
     

    Daewoo PUMA-250B Turning Center Machine

    TailStock
    10 IN Hydraulic Chuck
    Chip Conveyor
    Coolant Tank

      

    Video
  6. Daewoo PUMA 6S Turning Center
     

    Daewoo PUMA 6S Turning Center

    Equipped With:
    Coolant tank
    Chip Conveyor

      

  7. Doosan Puma TL-2000 Turning Center
     

    Doosan Puma TL-2000 Turning Center

    Year: 2007
    Controller: Fanuc 18i-TB
    Chip Conveyor
    Coolant Tank

      

    Video
  8. Fortune VTURN II-26 TURNING CENTER
     

    Fortune VTURN II-26 TURNING CENTER

    3-Jaw Hydraulic Chuck
    Hydraulic Tailstock
    Coolant Tank
    Chip Conveyor

      

    Video
  9. Nakamura Tome WT-250 TURNING CENTER
     

    Nakamura Tome WT-250 TURNING CENTER

    Abnormal load detection air bag function
    Chip conveyor high volume coolant and high pressure systems
    LNS quickload servo s3 short magazine bar feed
    LNS blaze air right bar receiver
    Bar feed interface manual guide eye conversational programming
    N-T nurse tool monitoring function Microcentric CB65mm front and sub Spindles
    N-T torque navigator for part and datum point recognition
    Transformer

      

  10. Mazak Quick Turn Nexus 200 Turning Center Lathe (6 Similar Machines Available)
     

    Mazak Quick Turn Nexus 200 Turning Center Lathe (6 Similar Machines Available)

    Controller: Mazatrol 640 T Nexus
    Chip Conveyor
    Coolant Tank

      

    Video
  11. Goodway GTS-150 MMX TURNING CENTER
     

    Goodway GTS-150 MMX TURNING CENTER

    Chip Conveyor
    Coolant tank
    Chip Bin
    2x radial Live tooling and 2x axial live tooling
    Tool Arm
    Boring Sleeves
    All Available Manuals

      

    Video
  12. Cincinnati Chucker Turning Center Lathe
     

    Cincinnati Chucker Turning Center Lathe

    The machine was completely rebuilt by Cincinnati and was retrofitted with a New Acramatic 2100 CNC Controller. It is in very good condition and has been used for only a few hours after the rebuilt.
    Controller: Acramatic 2100 Control
    Rebuilt by Cincinnati Milacron
    RS 232 Port Interface
    Chip Conveyor
    Heavy Duty Bed
    Hardened/Ground Bedways

    Sold

  13. Feeler FTC-100 Turning Center Lathe
     

    Feeler FTC-100 Turning Center Lathe

    EQUIPPED WITH:
    Chip Conveyor
    Coolant tank

    Sold

  14. Topper TNL-100A TURNING CENTER
     

    Topper TNL-100A TURNING CENTER

    Coolant Tank
    Chip Conveyor
    Parts Catcher
    Bar Feeder
    Misc Tool Holders
    8 inch Hydraulic chuck
    Tool Eye

    Sold

    Video
  15. Okuma LB45-II Turning Center
     

    Okuma LB45-II Turning Center

    18 IN 3-JAW KITAGAWA SOLID HYDRAULIC CHUCK
    MANUAL STEADY RESTS 0-6 IN AND 6-11 IN
    Chip Conveyor
    Coolant tank

    Sold

    Video
  16. Daewoo Puma 300C Turning Center Lathe
     

    Daewoo Puma 300C Turning Center Lathe

    Fanuc 21i-T Controller
    Year:2002
    Chip Conveyor
    Coolant Tank

    Sold

  17. Daewoo Puma 240 MC Turning Center Lathe
     

    Daewoo Puma 240 MC Turning Center Lathe

    Chip Conveyor
    Coolant tank
    Bar Feeder

    Sold

  18. Doosan PUMA GT 2600 Turning Center
     

    Doosan PUMA GT 2600 Turning Center

    Rigid 30 degree one piece cast iron slant bed
    Wide box way construction with Turcite-B anti-friction way surfaces
    High precision, pre-tensioned X & Z axes double nut ball screws with electric torque
    limiter protection
    12 station heavy duty servo controlled turret (.15 second turret swivel)
    25 hp high speed - high torque digital AC spindle motor
    Large 18.1" maximum turning diameter
    Large 3.19" bar capacity
    25.9" maximum turning length
    Fast 1,181 ipm Z axis rapid traverse
    Full sliding cover protection for tailstock guide ways
    Bolt up chip conveyor design for easy access and removal of coolant tank
    FANUC Oi-T control with swiveling operator's panel
    Doosan EZ Guide i Conversational Programming
    Doosan Tool Load Monitoring System

    Sold

  19. Daewoo PUMA-200LCX TURNING CENTER
     

    Daewoo PUMA-200LCX TURNING CENTER

    Equipped With:
    Complete Manuals
    Backup Parameters
    Misc. Tool Holders
    10” Hydraulic Chuck
    Coolant Tank
    Chip Conveyor
    Transformer

    Sold

    Video
  20. Cheveliar FCL-1028 Turning Center Lathe
     

    Cheveliar FCL-1028 Turning Center Lathe

    1025 Cutting Hours Only
    Controller: Fanuc Oi-TC
    Chip Conveyor

    Sold

[profiler]
Memory usage: real: 20971520, emalloc: 20453336
Code ProfilerTimeCntEmallocRealMem